+(65) 6933 9100 | +(62) 21 525 0609

Company’s Products

The Company’s products are widely sold to domestic and international oil and gas contractors operating in Indonesia. Its products have also been exported to overseas countries such as Malaysia, India, Vietnam,the Middle East, Japan,Canada, Australia, Venezuela, Philippines, Africa and the United States of America. The Company shipped the products through Citranusa Kabil Offshore Port.

The Company produces high quality products that can withstand extreme geological condition of the wells such as the temperature, pressures, corrosive level and others. There are various grades of OCTG ranging from the standard to premium grades to deal with different conditions in the fields as follow:

Standard API 5CT, 5DP, 5L Grade

Products are designed to withstand the average conditions of the wells and surrounding area.

High pressure high temperature (HPHT)

Products are to be used where high strength is required with limited resistance to sour service conditions.

Deep well

Products are to be used where high yield strength is required while maintaining ductility and fracture toughness.

Low temperature

Products are to be used in arctic regions where high impact toughness at subzero temperatures are required.

High collapse

Products are to be used for casing applied in high pressure wells. They offer an average of 30% up to 40% extra performance over API collapse rating. As mechanical properties and pipe dimensions are major factors in collapse resistance, the parameters have been optimized to guarantee high collapse pressures are D/T ratio, yield strength, ovality, wall thickness, and residual stresses.

Sour service

Tubing and casing pipes from these products are to be used in wells where H2S is present, where the determined threshold stresses is guaranteed.

High collapse & Sour service

Products are to be used for casing applied in high pressure wells where H2S is present.

Sweet corrosion

Martensitic grades, type 13Cr and Super 13Cr, are to be used in wells with the presence of CO2, chlorides and/or some H2S with temperature up to 180°C.

Highly corrosion

Ferritic-austenitic grades are to be used in wells withthe presence of CO2, chlorides and/or some H2S with temperature up to 250°C. Austenitic grades are to be used in wells where high concentrations of H2S, CO2and chlorides are present.